Skip to main content

Synergizing community-based forest monitoring with remote sensing: a path to an effective REDD+ MRV system



The reliable monitoring, reporting and verification (MRV) of carbon emissions and removals from the forest sector is an important part of the efforts on reducing emissions from deforestation and forest degradation (REDD+). Forest-dependent local communities are engaged to contribute to MRV through community-based monitoring systems. The efficiency of such monitoring systems could be improved through the rational integration of the studies at permanent plots with the geospatial technologies. This article presents a case study of integrating community-based measurements at permanent plots at the foothills of central Nepal and biomass maps that were developed using GeoEye-1 and IKONS satellite images.


The use of very-high-resolution satellite-based tree cover parameters, including crown projected area (CPA), crown density and crown size classes improves salience, reliability and legitimacy of the community-based survey of 0.04% intensity at the lower cost than increasing intensity of the community-based survey to 0.14% level (2.5 USD/ha vs. 7.5 USD/ha).


The proposed REDD+ MRV complementary system is the first of its kind and demonstrates the enhancement of information content, accuracy of reporting and reduction in cost. It also allows assessment of the efficacy of community-based forest management and extension to national scale.


The reliable monitoring, reporting and verification (MRV) of anthropogenic greenhouse gas emissions and removals from the forest sector is one of the most important elements necessary for the implementation of a performance-based reducing emissions from deforestation and forest degradation (REDD+) mechanism [1,2,3]. A few of the critical challenges of the REDD+ MRV systems are the reliable estimation of deforestation, afforestation, forest enhancement and degradation [3]. Currently, satellite-based monitoring systems are in vogue for the monitoring of forest cover gain and loss, facilitating the estimation of carbon fluxes from deforestation and afforestation [4].

On the other hand, using remote sensing to quantify carbon fluxes associated with forest enhancement and degradation in forest land remaining as forest over the given monitoring period is not possible on an operational scale, due to the complexities involved in detection and quantification [5]. In many developing countries, there is a low capacity for remote sensing-based monitoring and reporting of emissions from degradation (and removals from regrowth and afforestation) on a national level [6]. Estimates of above-ground biomass (AGB tons of dry weight) gain or loss in these cases are best collected by either forest inventory or production consumption surveys [7]. However, there is also a lack of government-endorsed programs that instill a dedicated effort for consistently monitoring forests on a national scale [7], due to the cost and time intensiveness of the field inventories.

In this context, Danielsen et al. [8] and Palmer [9] have explained the role of community-based forest monitoring systems and presented experiences from different countries in terms of optimizing field inventories, accuracy, economics, legitimacy, coupling and scalability to national systems. There is a very strong linkage between indigenous peoples and community forestry with less deforestation, degradation and improved enhancement [10,11,12]. The community-based monitoring systems involve scientifically identified, permanent sample plots over individual community forest (CF) areas, protocol development, training and periodic measurements of different parameters at specified intervals [13].

A few critical challenges of these community-based monitoring systems include the efficacy of high-intensity annual monitoring using permanent sample plots, lack of spatial extrapolation power to address changes beyond the sample plots, such as forest cover loss and degradation, and the reliable quantification of carbon dynamics over the entire study area [14]. Danielsen et al. [15] stressed the need for reliable third-party evaluations with a detailed explanation of the potential disadvantages of community monitoring, such as biased reporting by communities, intimidation of communities for biased reporting and over-burdening communities with workloads from state-owned systems [9]. Skutsch et al. [16] and Bavikatte and Jonas [17] stressed the need for the rational integration of geospatial technologies to improve the efficacy of community monitoring systems. Remote-sensing-based monitoring of forest degradation/enhancement essentially involves two main approaches [18]: first, detection indicated by a change in canopy cover or proxies and second, the quantification of gain or loss in AGB. Both approaches provide spatially explicit estimates with wall to wall coverage, enabling the understanding of dynamics beyond point-based estimates [4, 19]. The reliable remote-sensing-based visual indicators and systematic information systems could also extend objectivity to verification and third-party evaluations [1, 20]. The multi-resolution satellite systems help to address biomass estimations at the species, stand and forest type levels, enabling the spatial linking of different scales of information to reach from the community level to national estimates [21, 22].

Against this background, the present study is conducted with a focus to develop operationally feasible synergistic community forestry monitoring approach drawing the strengths and benefits of both remote sensing and community monitoring resulting in higher integrated value of salience, reliability and legitimacy as against standalone methods. We present very-high-resolution satellite-based tree cover parameters, including crown projected area (CPA), crown density and crown size classes, and discuss how these work as simple indicators for monitoring CFs, as well as their potential use by communities. This paper also demonstrates the development of remote-sensing-based temporal spatial biomass estimates with better accuracies using optimized community-based field inventories. The added advantage of spatially explicit biomass dynamics in understanding leakage, additions and persistence are demonstrated through the comparative evaluation of CF areas, where conservation practices are followed with non-CF areas. We also show, through comparative scoring, how the use of community monitoring in conjunction with remote sensing could create more value when added to the MRV system in terms of salience, reliability and legitimacy.


Study site description

We conducted the study in the Kayarkhola watershed of the Chitwan District, Nepal (Fig. 1). The total study area is 8002 ha, in which 2385 ha is under 16 community forestry (CF) units owned by community forest user groups (CFUG) and 5617 ha is under non-CFs (government and leasehold forests, including miscellaneous land cover). The study area is located at a latitude of 27.668–27.776 and a longitude of 84.556–84.695 [23]. The Kayarkhola watershed is one of three watersheds in Nepal where the REDD+ pilot project (2009–2013) has been implemented. Under the Forest Carbon Trust Fund (FCTF), 16 CFUGs received seed grants of US $21,905 in 2011 [24], US $24,691 in 2012 [25] and US $25,659 in 2013 [26].

Fig. 1
figure 1

Study area map


To assess and monitor the forest parameters in this study, orthorectified IKONOS-2 (August 3, 2002) and GeoEye-1 (November 2, 2009, and December 15, 2012) satellite images were used at 1 and 0.5 m spatial resolution, respectively.

Watershed boundary delineation was completed through spatial analysis using a 20 m-resolution topographic digital elevation model (DEM). A GIS-based participatory approach was used for the boundary delineation of the 16 CFs involving CFUGs and a district forest officer (Fig. 1 and Additional file 1: Appendix S1). The CF area was subtracted from the watershed boundary, to extract biophysical parameters for both CF and non-CF regimes.

Land cover assessment and change analysis

Tree cover area was extracted using the GEOgraphic object-based image analysis (GEOBIA) technique [27], performed on high-resolution satellite images (IKONOS and GeoEye-1) to delineate tree cover and non-tree cover areas. The segmentation parameters used include scale—400, shape—0.7, and compactness—0.3. The non-tree cover areas were further classified as agriculture, settlements, barren areas and water. The 2009 land cover map was used as a reference to classify the 2002 and 2012 satellite images. The tree cover loss and gain were estimated for the periods of 2002–2009 and 2009–2012 using the change matrix method [28].

Tree cover assessment: forest change analysis

Tree cover assessment was completed using three parameters: (1) crown projected area (CPA), (2) crown density and (3) crown sizes. CPA represents the aggregate area of all tree crowns vertically projected onto the ground surface. The sum of crown areas for all trees was measured on a fixed plot area and then divided by the ground area of the plot to give the crown density or closure. All 1 ha grids covering more than 10% tree crown density were treated as forests, and the remainder were < 10% crown density. Later, all forested grids were further classified into three forest crown density classes of 10–40%, 40–70% and > 70%. The transformation to higher crown density classes was considered an enhancement, while transformation to lower crown density classes was considered a degradation (Methodology details in Additional file 1: Appendix S2). The forests of Nepal are reported to be of middle age with less complex canopies [29], as observed over the study area, with trees largely belonging to the less than < 100 cm diameter class (Additional file 1: Appendix S3). Accordingly, in terms of the progression in crown size classes during 2002–09 and 2009–12 across the watershed, CF and non-CF areas were analyzed for use as proxy indicators of forest enhancement.

Field-based biomass estimations

The field-based biomass estimations were obtained from two sets of samples. The first set belongs to the community measurements, where the members of CFUGs carried out field measurements annually in permanent sample plots from 2009 to 2013. A total of 140 permanent circular sample plots (area 250 m2 and radius 8.92 m) covering 3.5 ha were established for field measurement in all CFs, with a sampling intensity of 0.147% (Fig. 1).

The approach for the second set of samples was focused on building the CPA-biomass model and to carry out the spatial biomass estimation for the entire watershed area. Based on the overall understanding gained from community-based field data on the variability of biomass, we have taken approximately 1/3 of the community field sampling intensity (51 out of 140) to cover 2.55 ha of forest area in the entire watershed with a sampling intensity of 0.043%. Additionally, we have increased the size of the plot to a 500 m2 circular plot to obtain more local variance. Field campaigns were conducted from December 2009 to December 2010.

In each plot for both sampled streams, tree parameters including DBH (only > 5 cm), height, crown diameter, and species were recorded in addition to geographic coordinates. A GPS receiver for location identification, TruPulse 360B for tree height measurement and diameter tape for DBH measurement were all used in the field. Plot-level AGB values (in tons) were calculated using the allometric equation given by Chave et al. [30] for tropical, moist hardwood forests, which were upscaled at 1 ha. Wood specific gravities for each tree species were taken from data published by Chaturvedi et al. [31].

Spatial AGB model

For spatial AGB, a linear regression relationship was developed using field-based biomass data from the center of 1 ha grid and CPA obtained from the 2009 GeoEye-1 image. The model was calibrated and validated using 31 plots (60%) and 20 plots (40%), respectively, based on measured AGB values from the field data. A significant correlation coefficient allowed us to use the same linear regression model to estimate the biomass using CPA maps for the entire study area for 2002 and 2012. Based on individual time spatial AGB maps, biomass spatial change maps at the two time intervals of 2002–2009 and 2009–2012 were prepared to assess the gain and loss of biomass over the entire watershed, for both CF and non-CF areas.

Comparison of remote-sensing-based and field-based AGB

The community-based permanent field plot measurements have given us information on AGB (tons/ha) and the mean annual increment over 140 locations for the years 2009 and 2012. From the biomass maps of 2009 and 2012 over these 140 locations, remote sensing model-based biomass estimates were extracted and then compared with community-based biomass values, with the root mean square error determined to analyze the statistical significance.

REDD+ MSRL index

The aspects governing the operational feasibility and sustainability of our approach and proposed framework were analyzed using salience, reliability and legitimacy parameters as identified by Danielsen et al. [15]. Salience reflects how knowledge outcome answer right question, outcome provided is in useful form and time, offers an opportunity to relate results to policies and actions. The contextualization in terms of adopting local context, potential to couple with national systems, linkages to performance and support to undertake diagnostic/prescriptive actions are the variables taken to assess salience. The reliability refers to meeting standards of scientific plausibility, technical adequacy about data, methods used, analysis applied and robustness of conclusions. The information content, accuracy, cost effectiveness and repeatability are the variables taken to assess reliability. Legitimacy offers an opportunity for involvement of stakeholders with appropriate mechanisms to facilitate the expression of values and the resolution of conflicts with end users. The potential to remove bias, transparency of the process, scope for participatory process and mutual trust among the stakeholders involvement are the variables used for legitimacy assessment [8, 15, 32].

The different variables selected as above for salience, reliability and legitimacy in accordance with REDD+ monitoring context were ranked on 1–3 scale (Table 4). The score values were assigned based on the tools and methods used and their output characteristics as explained in Table 4 for each variable. In order to assess the integrated effect of all the parameters and assess potential adoptability, we developed the REDD+ MSRL Index (Monitoring with salience reliability legitimacy) using the following formula:

$${\text{REDD + MSRL index }}({\text{Monitoring with salience reliability legitimacy}}) = \frac{{\sum\nolimits_{n = 1}^{12} {( {\text{S}}_{\text{i}})} }}{{\sum\nolimits_{n = 1}^{12} {( {\text{Max}}_{\text{i}})} }},$$

where S i , is the score of the ith variables of salience, reliability and legitimacy, i = 1,2, …12 and Max i  = Max {S i }


Land cover change analysis

In the study area, the total tree cover area has increased from 5584 to 5864 ha during 2002–2009 and to 5892 ha by 2012 at the watershed level. A similar increase is also found in both CF and non-CF areas of the watershed (Table 1). However, from the tree cover change dynamics (Fig. 2 and Additional file 1: Appendix S3), it can be found that CFs are stable and improved, compared to non-CF areas and changes at the watershed level. In the CF areas, 90% of the tree cover remained the same without conversion during the periods of 2002–09 and 2009–12. In addition, the conversion of non-tree cover into tree cover has resulted in an 8% increase, and tree cover to non-tree cover only increased by 1% in CF areas.

Table 1 Status of different monitoring parameters extracted from satellite data 2002, 2009, 2012
Fig. 2
figure 2

Changes in different biophysical parameters extracted from satellite data during 2002–2009 and 2009–2012, in CFs and non-CFs areas. a Land cover change. b Tree crowns size (m2) change. c Lower crown density class. d Higher crown density class

Forest crown density change: enhancement and degradation

The areas under all forest crown density classes were found to have increased during the periods of 2002–09 and 2009–12 in both the CF and non-CF areas, signifying a net positive growth of forests in the watershed (Table 1). The enhancement is largely due to the conversion of the 40–70% class into the > 70% crown density class, in both CF and non-CF areas. The degradation is found to be highest in the non-CF areas, where 155 ha of the > 70% crown density class is converted into the 40–70% crown density class (Fig. 2 and Additional file 1: Appendix S3).

Assessment of CPA and tree crown sizes

An accuracy of 83% was achieved in the delineation of tree crowns, as observed through the relationship determined between the number of segmented and observed tree crowns (Additional file 1: Appendix S5). Spatial maps over the watershed can be seen in Additional file 1: Appendix S6. The CPA in the higher crown size class of > 30 m2 was found to have increased by 59.4% during 2002–2009 and by 0.4% during 2009–2012 at the watershed level, with a total area increase of 872 ha over the > 30 m2 crown size class, indicating a positive growth of forests (Table 1).

Comparison of remote-sensing-based and field-based AGB

A linear regression model was obtained to map AGB at the watershed level (AGB = 0.0543 * CPA − 62.078 with R2 = 0.76). An 84% accuracy was achieved between the predicted and observed biomass values using 20 sample locations (Fig. 3). AGB values from maps (Additional file 1: Appendix S7) were extracted over 140 sample plot locations where community inventory-based biomass estimations were available. The estimates were aggregated over 15 CFs (One CF was excluded from the analysis because that was not delineated in 2009 and thus not permanently observed by CFUG) using the corresponding sample plots for each CF (Table 2). The annual increase in biomass of 2.37 tons/ha was estimated by the community-based inventory, whereas the CPA model-based estimates were 2.61 tons/ha with a 0.95 tons/ha root mean square error (Table 2).

Fig. 3
figure 3

(Left side scatterplot) A linear regression model fitting between CPA and biomass values, (right side scatterplot) validation of biomass model and (bottom table) the statistical values of linear regression model

Table 2 Comparison of field-based and remote-sensing based AGB values in the community forests in Kayar Khola watershed in 2009 and 2012 and change over time

Spatial biomass change

The AGB during 2002–2009 and 2009–2012 increased by 116,788 and 29,085 tons, respectively, over CF areas with an annual increase of 7.7 and 4 tons/ha during 2002–09 and 2009–2012, respectively (Additional file 1: Appendix S4). The assessment over the watershed area, including CF and non-CF areas, reveals that the study area has largely acted as a sink through the increased biomass by 266,284 and 57,217 tons during 2002–09 and 2009–12, respectively.

Cost comparison

The cost comparison of three different approaches (1) Community based monitoring (CM) without using remote sensing (2) Remote Sensing + Professionals based monitoring (RS + P) and (3): Remote Sensing + Community based monitoring (RS + CM) is presented in Table 4. The cost estimation involved three components satellite data cost, field inventory and image interpretation analysis. The community based monitoring for the year 2009 and 2012 costs USD16,000 covering CF area of 2385 ha with sampling intensity of 0.147%/year. Accordingly, the average per ha cost is found to be USD 7.5 ha. For the remote sensing based monitoring, optimal sampling intensity of 0.043% has been achieved using remote sensing based stratification across CF and non-CF areas covering the entire watershed for the year 2009. The CPA based biomass model developed for 2009 using this field data was used to generate biomass estimates for the year 2012 without further fieldwork. Hence the RS + P approach resulted in an average monitoring cost of USD 4/ha due to reduction in field sampling intensity for the year 2009 and avoiding sampling for the year the 2012 by using CPA based biomass model. The RS + CM based cost is found further reduced to USD 2.5/ha when the field inventory cost of professionals is replaced with the cheaper per plot cost of community based monitoring (Table 3). This reduced cost is realized despite including cost of satellite data for both the years and professional’s cost for data interpretation. Apart from realizing the cost benefits, the increased number of products and information generated using remote sensing approach is also presented in Table 3.

Table 3 Cost (USD) of forest monitoring (2009–2012) using different approaches over our study area—a comparative assessment using different approaches
Table 4 Comparative assessment (on 1–3 score value) of potential adaptability of Community based monitoring (CM) and Remote Sensing + Community based Monitoring (RS + CM) methods


The comparative score values against different variables of salience, reliability and legitimacy for Community based monitoring (CM) and Remote Sensing + Community based Monitoring (RS + CM) methods are presented in Table 4. Both the methods were scored with equal and high score values against contextualization. The variable for diagnostic/prescriptive support has got lowest score for CM method among all variables of salience. The RS + CM method is weighted with score value of 11 for salience against score value 8 of CM method. The variables on information content and cost effectiveness of reliability parameter are found with low score of CM method as compared to RS + CM method. The CM method is weighted with high scores for variables on participatory process and mutual trust. The integrated REDD+ MSRL Index of CM and RS + CM methods are 0.72 and 0.86 respectively.


Several studies have been conducted over our REDD+ pilot study areas in Nepal to assess the potential application of remote sensing to estimate tree canopy diameters, and these studies reported a strong relationship between CPA and ground measured biomass [33, 34]. The present study adds a temporal change component to these earlier studies through the conjunctive use of remote sensing and community inventories to develop salient, reliable and legitimate monitoring methodology.

Remote sensing-based canopy indicators and biomass estimation: integration with community monitoring

This potential for canopy parameters to work as proxy indicators of the reduction/increase of biomass [18] reflects forest degradation/enhancement (Additional file 1: Appendix S6). Additionally, spatially explicit temporal CPA maps can provide strong secondary support for plot level community measurements, as a means for third-party evaluations or verification of changes within and outside CF areas.

As a proof-of-principle, we generated a range of CPA templates representing the basal area and analyzed the capacity of communities to understand such image templates (Additional file 1: Appendix S8) through a two-day field orientation workshop with 30 representatives of CFUGs. Here, we propose the use of Google Earth high-resolution temporal images and cost-effective software such as Easy Acreage ( to develop simple operational packages for developing CPA-based maps and quantitative assessments.

The development of temporal biomass maps using the strong relationship between remote sensing-based CPA and community-based biomass measurements yielded two important useful outcomes in terms of extending the area under the assessment beyond community forest areas (Table 3), then adopting optimized field sampling only to develop a CPA-based biomass model and produce a model-based biomass maps for three periods. This has essentially eliminated community-based monitoring for 2002 and 2012 but to use CPA-based biomass model of 2009 to produce biomass maps for 2002 and 2012 and hence has optimized the cost (Table 3). Hence, the study clearly documents trade-offs that exist between monitoring costs and precision, and this translates to REDD+ benefits as a need for promoting effective REDD+ monitoring systems [15, 18].

CF and non-CF change dynamics: an upscaling framework

We have up scaled our plot-level estimates to a watershed using CPA-based biomass model representing Shorea robusta and a mixed, broad-leaved forest type category, which could be further used to upscale across identical forest type under a similar bioclimatic region (Additional file 1: Appendix S9). The forest type map of Nepal DFRS [29] clearly depicts six major forest types, which are embodiments of climatic, physiographic and physiognomic expressions that provides a reliable framework for developing underneath stand level models and up scaling, as demonstrated in the study.

This kind of community driven remote sensing-based, bottom up sub-national assessment aggregated over the country could be explored for seamless flow into national monitoring systems to support national level forest reference level (FRL) for REDD+ and to build salience, reliablity and legitimacy for community-based inventory systems [8, 35]. For example, such an upward flow of community data into Landsat TM-based global forest monitoring systems [36] could contribute to the validation, improvement, and evolution of national forest monitoring systems.

Operational feasibility analysis REDD+ MSRL index

The score values of different variables of salience, reliability and legitimacy have brought out the strengths and weaknesses of both the methods. The spatial explicit, synoptic, multi-scale nature and visualization benefits of remote sensing have added advantage for higher scoring of several variables for RS + CM method. The higher scores are gained especially for variables like coupling local systems to national systems, enhancing information content and cost-effectiveness. Our assessment indicates the need for improving the participatory process and mutual trust even after integrating community sampling into the remote sensing based approach to enhance the legitimacy of the system. This is due to the fact that RS + CM method involve professionals and communities of different disciplines and hence the potential risk for mistrust might arise on technicalities and capabilities leading to failure of effective implementation of the monitoring as a joint approach. Similarly, parameters like repeatability and removal of bias are found to be challenging variables for both the approaches owing to their inherent limitations as mentioned in Table 4. Our proposed REDD+ MSRL Index has essentially taken into account these variable strengths and weaknesses of different variables of salience, reliability and legitimacy reflecting higher index value of 0.86 of RS + CM method against 0.72 of CM method. Based on this, it can be concluded that RS + CM method enhanced the effectiveness of REDD+ monitoring. Even our community-based monitoring cost is also found to be along similar lines of experience elsewhere in the world (Additional file 1: Appendix S10).

It is to be noted that as part of developing REDD+ MRV system, the earlier studies were focused to develop ecologically sound forest change reporting databases and systems [23, 28, 37,37,38,39,40,41], understand and implement how communities perceive and practice scientific data and tools [8, 32, 42,43,44,45] and the challenges in evolving further technological improvements and capacity building towards institutionalizing such systems [46, 47]. However, our study has drawn strengths from understanding of individual streams of biophysical and social studies and developed unique method of integrating frontier technology based information with local community measurements and adopted novel way of testing its complementarity, efficacy and scalability using REDD+ MSRL Index. The proposed REDD+ MRV complimentary system is found enhancing information content and accuracy of change reporting, many fold reduction in cost, assessing efficacy of community forest regimes against non-community forest regimes, extending spatial framework to couple local systems to national monitoring systems. In this view, the study adds novelty to take forward in evolving socially acceptable REDD+ MRV systems and could draw necessary attention from policy makers for an appropriate uptake.

The recent developments in the global forest watch, upcoming regional cooperation systems such as SAARC for providing low-cost high-resolution satellite data, consortium-based approaches, open source software platforms, satellite data, innovative participatory and capacity-building tools can all extend an enormous scope to implant these systems among CFUGs to monitor and report forest changes [46]. Considering the great degree of promise reported in the success stories of the capacities of communities to produce accurate forest inventories [8], developing synergies with such emerging open source geospatial technologies could be a more positive endeavor to achieve in the near future.


With the judicious and conjunctive use of approaches, remote sensing technology would be an additional, complementary asset for community-based forest monitoring, as well as for enhancing the effectiveness of REDD+ MRV systems. The high-resolution satellite-based tree cover monitoring products would be useful and strengthen third-party level evaluations. The national frameworks facilitating forward and backward coupling of the inventory systems could be leveraged from our proposed conjunctive approach to remote sensing and community monitoring systems. The global and regional cooperation and extended availability of open access geospatial services is strongly needed for testing and establishing such systems across different forest landscapes, as well as evolving as an approach with wider applicability.


  1. Visseren-Hamakers IJ, Gupta A, Herold M, Peña-Claros M, Vijge MJ. Will REDD+ work? The need for interdisciplinary research to address key challenges. Curr Opin Environ Sustain. 2012;4:590–6.

    Article  Google Scholar 

  2. Gibbs HK, Brown S, Niles JO, Foley JA. Monitoring and estimating tropical forest carbon stocks: making REDD a reality. Environ Res Lett. 2007;2:1–13.

    Google Scholar 

  3. Miettinen J, Stibig H-J, Achard F. Remote sensing of forest degradation in Southeast Asia—aiming for a regional view through 5–30 m satellite data. Glob Ecol Conserv. 2014;2:24–36.

    Article  Google Scholar 

  4. De Sy V, Herold M, Achard F, Asner GP, Held A, Kellndorfer J, et al. Synergies of multiple remote sensing data sources for REDD+ monitoring. Curr Opin Environ Sustain. 2012;4:696–706.

    Article  Google Scholar 

  5. Sasaki N, Putz FE. Critical need for new definitions of “forest” and “forest degradation” in global climate change agreements. Conserv Lett. 2009;2:226–32.

    Article  Google Scholar 

  6. Herold M. An assessment of national forest monitoring capabilities in tropical non-Annex I countries: Recommendations for capacity building; 2009. pp 1–62.

  7. FAO, Organization F and A. Assessing forest degradation towards the development of globally applicable guidelines. For. Resour. Assess. Work. Pap. 17. Rome; 2011.

  8. Danielsen F, Skutsch M, Burgess ND, Jensen PM, Andrianandrasana H, Karky B, et al. At the heart of REDD+: a role for local people in monitoring forests? Conserv Lett. 2011;4:158–67.

    Article  Google Scholar 

  9. Palmer FB. Community forest monitoring in REDD+: the “M” in MRV? Environ Sci Policy. 2011;14:181–7.

    Article  Google Scholar 

  10. Bhattarai RC. Economic impact of community forestry in Nepal: a case of mid-hill districts of Nepal. Econ J Dev Issues. 2011;13 and 14:75–96.

  11. Nagendra H, Pareeth S, Sharma B, Schweik CM, Adhikari KR. Forest fragmentation and regrowth in an institutional mosaic of community, government and private ownership in Nepal. Landsc Ecol. 2007;23:41–54.

    Article  Google Scholar 

  12. Ranjitkar S, Kindt R, Sujakhu NM, Hart R, Guo W, Yang X, et al. Separation of the bioclimatic spaces of Himalayan tree rhododendron species predicted by ensemble suitability models. Glob Ecol Conserv. 2014;1:2–12.

    Article  Google Scholar 

  13. Poudel M, Thwaites R, Race D, Dahal GR. REDD+ and community forestry: implications for local communities and forest management—a case study from Nepal. Int For Rev. 2014;16:39–54.

    Google Scholar 

  14. Mollicone D, Achard F, Federici S, Eva HD, Grassi G, Belward A, et al. An incentive mechanism for reducing emissions from conversion of intact and non-intact forests. Clim Change. 2007;83:477–93.

    Article  CAS  Google Scholar 

  15. Danielsen F, Adrian T, Brofeldt S, van Noordwijk M, Poulsen MK, Rahayu S, et al. Community monitoring for REDD+ : international promises and field realities. Ecol Soc. 2013;18(3):41.

    Article  Google Scholar 

  16. Skutsch MM, van Laake PE, Zahabu EM, Karky BS, Phartiyal P. Community monitoring in REDD+ . Realis. REDD+ Natl. Strateg policy options. Bogor, Indonesia: Center for International Forestry Research (CIFOR); 2009. Accessed 4 Mar 2017.

  17. Bavikatte K, Jonas H. Bio-cultural community protocols: a community approach to ensuring the integrity of environmental law and policy. Nat Justice, United Nations Environ Prog. 2009. Accessed 4 Mar 2017.

  18. Mitchell AL, Rosenqvist A, Mora B. Current remote sensing approaches to monitoring forest degradation in support of countries measurement, reporting and verification (MRV) systems for REDD. Carbon Balanc Manag. 2017;12:9.

    Article  Google Scholar 

  19. Baccini A, Goetz SJ, Walker WS, Laporte NT, Sun M, Sulla-Menashe D, et al. Estimated carbon dioxide emissions from tropical deforestation improved by carbon-density maps. Nat Clim Chang. 2012;2:182–5.

    Article  CAS  Google Scholar 

  20. Balooni K, Lund JF. Forest rights: the hard currency of REDD+. Conserv Lett. 2014;7:278–84.

    Article  Google Scholar 

  21. Joseph S, Herold M, Sunderlin WD, Verchot LV. REDD+ readiness: early insights on monitoring, reporting and verification systems of project developers. Environ Res Lett. 2013;8:34038.

    Article  Google Scholar 

  22. Scheyvens H. Policy brief: community-based forest monitoring for REDD+ :lessons and reflections from the field, vol. 22. Hayama: IGES; 2012.

    Google Scholar 

  23. Karna YK, Hussin YA, Gilani H, Bronsveld MC, Murthy MSR, Qamer FM, et al. Integration of WorldView-2 and airborne LiDAR data for tree species level carbon stock mapping in Kayar Khola watershed, Nepal. Int J Appl Earth Obs Geoinf. 2015;38:280–91.

    Article  Google Scholar 

  24. CIMOD (2011) ICIMOD pilots first Forest Carbon Trust Fund in Nepal – helps communities benefit from forest conservation and sustainable use. Accessed 7 Feb 2015.

  25. ICIMOD (2012) A monitoring report on forest carbon stocks changes in REDD project sites (Ludikhola, Kayarkhola and Charnawati). ICMOD, Kathmandu, Nepal. Accessed 7 Feb 2015.

  26. ANSAB (2013) REDD+ pilot project in Nepal provides seed grants to communities for their role in conservation and sustainable management of forests. The Asia Network for Sustainable Agriculture and Bioresources (ANSAB) Kathmandu, Nepal. Accessed 7 February 2015.

  27. Blaschke T, Hay GJ, Kelly M, Lang S, Hofmann P, Addink E, et al. Geographic object-based image analysis—towards a new paradigm. ISPRS J Photogramm Remote Sens. 2014;87:180–91.

    Article  Google Scholar 

  28. Gilani H, Shrestha HL, Murthy M, Phuntso P, Pradhan S, Bajracharya B, et al. Decadal land cover change dynamics in Bhutan. J Environ Manag. 2015;148:91–100.

    Article  Google Scholar 

  29. DFRS. State of Nepal’ forests. Kathmandu: Government of Nepal, ministry of forests and soil conservation, department of forest research and survey; 2015.

  30. Chave J, Réjou-Méchain M, Búrquez A, Chidumayo E, Colgan MS, Delitti WBC, et al. Improved allometric models to estimate the aboveground biomass of tropical trees. Glob Chang Biol. 2014;20:3177–90.

    Article  Google Scholar 

  31. Chaturvedi RK, Raghubanshi AS, Singh JS. Non-destructive estimation of tree biomass by using wood specific gravity in the estimator. Natl Acad Sci Lett. 2010;33:133–8.

    Google Scholar 

  32. Danielsen F, Jensen PM, Burgess ND, Altamirano R, Alviola PA, Andrianandrasana H, et al. A multicountry assessment of tropical resource monitoring by local communities. Bioscience. 2014;64:236–51.

    Article  Google Scholar 

  33. Hussin YA, Gilani H, Leeuwen L, Murthy MSR, Shah R, Baral S, et al. Evaluation of object-based image analysis techniques on very high-resolution satellite image for biomass estimation in a watershed of hilly forest of Nepal. Appl Geomatics. 2014;6:59–68.

    Article  Google Scholar 

  34. Pandey R. Development and environment: an assessment of population growth vis-a-vis soil erosion in Nepal. Dhaulagiri J Sociol Anthropol. 2014;7:173–96.

    Article  Google Scholar 

  35. Michener WK, Porter J, Servilla M, Vanderbilt K. Long term ecological research and information management. Ecol Inform. 2011;6:13–24.

    Article  Google Scholar 

  36. Hansen MC, Potapov P V, Moore R, Hancher M, Turubanova SA, Tyukavina A, et al. High-resolution global maps of 21st-century forest cover change. Science. 2013;342:850–3.

  37. Pujar GS, Dadhwal VK, Murthy MSR, Trivedi S, Reddy PM, Swapna D, et al. Geospatial approach for national level TOF assessment using IRS high resolution imaging: early results. J Indian Soc Remote Sens. 2016;44:321–33.

    Article  Google Scholar 

  38. Qamer F, Shehzad K, Abbas S, Murthy MSR, Xi C, Gilani H, et al. Mapping deforestation and forest degradation patterns in western Himalaya, Pakistan. Remote Sens. 2016;8:1–17.

    Article  Google Scholar 

  39. Qazi WA, Gilani H. Exploring the use of spaceborne SAR for above ground biomass measurements in the Hindu Kush Himalayan region and Pakistan. In: Multi-scale for biomass assess monit Hindu Kush Himal Reg a geospatial perspect, p. 102. 2015. Accessed 4 Mar 2017.

  40. Uddin K, Gilani H, Murthy MSR, Kotru R, Qamer FM. Forest condition monitoring using very-high-resolution satellite imagery in a remote mountain watershed in Nepal. Mt Res Dev. 2015;35:264–77.

    Article  Google Scholar 

  41. Qin Y, Xiao X, Dong J, Zhang G, Roy PS, Joshi PK, et al. Mapping forests in monsoon Asia with ALOS PALSAR 50-m mosaic images and MODIS imagery in 2010. Sci Rep. 2016;6:20880.

  42. Junttila V, Gautam B, Karky BS, Maguya A, Tegel K, Kauranne T, et al. Robustness of model-based high-resolution prediction of forest biomass against different field plot designs. Carbon Balanc Manag. 2015;10:29.

    Article  Google Scholar 

  43. Karky BS, Vaidya R, Karki S, Tulachan B. What is REDD+ additionality in community managed forest for Nepal? J For Livelihood. 2013;11: 9.

  44. Subedi BP, Pandey SS, Pandey A, Rana EB, Bhattarai S, Banskota TR, et al. Forest carbon stock measurement: guidelines for measuring carbon stocks in community-managed forests. Nepal: Asia Netw Sustain Agric Bioresour Fed Community For Users, Int Cent Integr Mt Dev Katmandú; 2010. p. 69.

    Google Scholar 

  45. Uddin K, Shrestha HL, Murthy MSR, Bajracharya B, Shrestha B, Gilani H, et al. Development of 2010 national land cover database for the Nepal. J Environ Manag. 2015;148:82–90.

    Article  Google Scholar 

  46. Hossain F, Serrat-Capdevila A, Granger S, Thomas A, Saah D, Ganz D, et al. A global capacity building vision for societal applications of earth observing systems and data: key questions and recommendations. Bull Am Meteorol Soc. 2016;97:1295–9.

    Article  Google Scholar 

  47. Murthy MSR, Gurung DR, Qamer FM, Bajracharya S, Gilani H, Uddin K, et al. Reform Earth observation science and applications to transform Hindu Kush Himalayan Livelihoods—services-based vision 2030. 2016. p. 27–62.

Download references

Authors’ contributions

MSRM responsible for study design, results interpretation, first draft of the manuscript and finalization, HG performed data analysis and manuscript preparation, BSK performed community based data collection and cost–benefit analysis. ES contributed to study design and manuscript preparation, MS responsible for REDD compliance analysis and manuscript writing, UAK carried out image processing, SK responsible for image processing and field data collection, MP responsible for REDD compliance analysis, quality control and field data collection. All authors read and approved the final manuscript.


The authors acknowledge the REDD+ NORWEGIAN pilot project, ANSAB, FECOFUN, ITC Netherlands and NASA Land-Cover/Land-Use Change Program (No. NNX14AD94G). This work would not have been possible without the active participation of District Forest Officers (DFOs) and Community Forest User Groups (CFUGs). We are also grateful to Birendra Bajracharya, Mir Matin, Yousif Ali Hussain, Govinda Joshi, and Seema Karki and our former colleagues Salman Asif Siddique and Eak Bhadur Rana.

Competing interests

The authors declare that they have no competing interests.

Availability of data and materials

The datasets used in this article are available upon request.

Consent for publication

All authors consent to the publication of this manuscript.


The views and interpretations in this publication are those of the authors and are not necessarily attributable to ICIMOD. The work does not imply the expression of any opinion by ICIMOD concerning the legal status of any country, territory, city or area of its authority or concerning the delimitation of its frontiers or boundaries or the endorsement of any product.

Ethics approval and consent to participate

Not applicable.


This study was partially supported by the core funds of the ICIMOD, which were contributed by the governments of Afghanistan, Australia, Austria, Bangladesh, Bhutan, China, India, Myanmar, Nepal, Norway, Pakistan, Switzerland and the United Kingdom. We would like to express our gratitude to the donor agencies of NORAD and SERVIR-NASA, USAID.

Publisher’s Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Author information

Authors and Affiliations


Corresponding author

Correspondence to Hammad Gilani.

Additional file


Additional file 1. Appendix S1: Delineated community forest in Kayar Khola watershed, Chitawan based on handing over time.

Rights and permissions

Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (, which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Murthy, M.S.R., Gilani, H., Karky, B.S. et al. Synergizing community-based forest monitoring with remote sensing: a path to an effective REDD+ MRV system. Carbon Balance Manage 12, 19 (2017).

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: